Wireless Remote Control Button
Main technical indicators:
1. Operating voltage: 12VDC (other voltages can be customized)
2. Quiescent operating current: ≤ 6mA
3. Working temperature: -30 ~ +70 degrees
4. Receiver sensitivity:-103dBm
5. Operating frequency: 315MHz, 433MHz special frequency can be customized
6. Controller Size: 68.0mmX48.0mmX19.0mm
Output Mode: This model has three output modes: signal interlocking, signal of non-lock, the signal delay 2 seconds of non-lock (delay time can be customized)
1. Signal interlocking: 1 and 2 connections
A key by remote control, the corresponding relay A suction to keep the merger; press B button, A disconnect relay, and B keys corresponding to relay the merger to maintain suction. Do the same work cycle.
2. Signal Non-lock: 1 and 2 and 3 are not connected
A key by remote control, and A keys corresponding to the relay pull-in, release immediately after the relay off; press the B key, with the B button corresponding to the relay pull-in, release immediately after the break.
3. Signal Delay 2 seconds of non-lock: 2 and 3 to connect
A key by remote control, and A keys corresponding to the merger delay relay suction disconnected after 2 seconds, press the remote control button B, and B keys corresponding to the merger delay relay suction disconnected after 2 seconds. (Delay time can be customized)
This offering relay output has LED work instructions, operation and intuitive, easy to use.

