Let the smart lock durable method analysis
Proyu Technology
Proyu Technology
2017-06-26 14:43:39
Smart lock is different from the traditional mechanical locks, in the user identification, security, management, more intelligent lock.
2, filling the oil
Cylinder as a door lock the most important mechanical structure, naturally can not ignore the maintenance. Found that the cylinder is not flexible or can not maintain the correct position, then the cylinder should be added to the lubricating oil:
Remove the side trim, oil gun to the lock cylinder fuel injection,
Turn the handle and knob until the door locks are flexible.
4, prepare the mechanical key to unlock
After a long time to go out, to avoid encounter due to the battery exhausted lead to the smart lock strike, ready to mechanical keys can not be ignored. Remember to open the door lock, but also remember to replace the door lock battery, restore the normal function.
PROYU, electric lock suppliers china, provide outstanding intelligent locks.
1, clock calibration
The door lock clock is very important for the smart lock internal system, which does not accurately affect the use of the key card, regular inspection and timely calibration becomes very important, timely calibration, the same as with the set clock. When the door lock is repaired, if the power is over 10 minutes, the door lock clock should be reset after maintenance.
1, clock calibration
The door lock clock is very important for the smart lock internal system, which does not accurately affect the use of the key card, regular inspection and timely calibration becomes very important, timely calibration, the same as with the set clock. When the door lock is repaired, if the power is over 10 minutes, the door lock clock should be reset after maintenance.
Cylinder as a door lock the most important mechanical structure, naturally can not ignore the maintenance. Found that the cylinder is not flexible or can not maintain the correct position, then the cylinder should be added to the lubricating oil:
Remove the side trim, oil gun to the lock cylinder fuel injection,
Turn the handle and knob until the door locks are flexible.
PROYU, RF ID card IC card company, your security life creator.
3, check the lock body and the lock plate clearance
Lock body and lock plate with the gap also need to check, lock and lock plate hole with the level is not the same, the door and the door with the best gap is 1.5mm-2.5mm. If not, it is necessary to adjust the door hinge or lock plate position. At the same time pay attention to the weather caused by thermal expansion and contraction, to ensure that the door and door frame, lock body and lock plate clearance appropriate.
Lock body and lock plate with the gap also need to check, lock and lock plate hole with the level is not the same, the door and the door with the best gap is 1.5mm-2.5mm. If not, it is necessary to adjust the door hinge or lock plate position. At the same time pay attention to the weather caused by thermal expansion and contraction, to ensure that the door and door frame, lock body and lock plate clearance appropriate.
After a long time to go out, to avoid encounter due to the battery exhausted lead to the smart lock strike, ready to mechanical keys can not be ignored. Remember to open the door lock, but also remember to replace the door lock battery, restore the normal function.
If you need more information, please click Finger access control Time attendance distributor.
